Selecting labels
Selecting transparencies
Selecting banner paper
Selecting envelopes
68
Use only paper face label stock. Ink will not dry on vinyl,
plastic, or clear label stock. Individual labels will not feed
properly. Letter or A4 sheet size for the labels is required
at a minimum. For best results, use labels designed for an
ink jet printer. The maximum quantity the tray can
accommodate is 50 sheets.
Do not use any label material that is partially used, folded,
curled, or wrinkled.
Use transparencies designed for ink jet printers only. Do
not use paper-backed transparencies. Place transparencies
so that the rough side faces the back of the printer.
Use any banner paper designed for ink jet printers. Do not
use track-fed paper or paper in rolls. The C8 printer can
accommodate single 8.5 x 55 in. or 210 mm. x 1485 mm.
sheets.
Most short flap envelopes work well in the printer,
although some variables in paper composition may affect
print quality. Fully test an envelope before purchasing
large quantities.