Tray Options; Include - Xerox DocuColor 5000 Administrator's Manual

Tray Options

Auto Tray Switching, Auto Paper Selection, and Do Not Include
Default Setting
Auto Tray Switching
(ATS)
Auto Paper Selection
(APS)
Do Not Include
D o c u C o lo r 50 0 0 A dm i ni s t r at o r G u i de
TIP: After running your print job, reenter Administrator mode,
System Settings, NVM Read/Write, and
that is currently on. Follow the steps outlined in this procedure
and use these settings for the New Value number:
• To switch off the Special Media Setting for Drilled Papers,
enter 1000.
• To switch off the Special Media Setting for LEF Tab Stock,
enter 0.
• To switch off the Carbonless Media, enter 0.
TIP: To prevent paper jams from occurring with stock types other
than the ones mentioned in this procedure, you must switch off
the NVM Read/Write feature before running other print jobs.
Use this feature to change the factory default settings for the
following:
• Auto Tray Switching
• Auto Paper Selection
• Do Not Include
• Paper Tray Air Assist
• Tray Priority
Choose the default settings for the following options:
Allows the digital press to automatically select another paper tray, containing the
appropriate paper, if the selected paper tray becomes unusable.
Allows the digital press to automatically select the appropriate paper size for the
job being processed, without a specific paper tray being selected.
When Single Paper Weight is selected as the default setting, Auto Paper selects
2
only 81-105 g/m paper in the correct size. When the Mixed Paper Weight
Productivity Setting is enabled, Auto Paper selects only 106-135 g/m
correct size.
Selecting a tray or trays in this option tells the machine to ignore any selections
that were made in the Auto Tray Switching or the Auto Paper Selection options.
What the Default Does
2. S y s te m S e tt in g s
the feature
switch off
2
paper in the
2-23