Power Saver - Xerox DocuColor 5000 Administrator's Manual

2. S y s te m S e tt in g s

Power Saver

Use this feature to set the time that elapses until the digital press
and System PC enter a reduced power consumption mode. The
timers are activated when all print jobs have been completed and
there are no jobs in the job queue.
The digital press and/or System PC exits the Power Saver mode
when a job is sent to be printed or the UI on the System PC is
activated.
TIP: The System PC & Print Engine and Print Engine Only
l
features must be enabled by your Xerox representative before you
can use them. If these features are not enabled, call your Xerox
representative for more information.
To change the time for each power saver feature, use the following
procedure.
1.
From the System Settings window, select the System tab.
D o c u C o lo r 50 0 0 A dm i ni s t r at o r G u i de
2-13