User Safety Information - Welch Allyn ELI 380 Service Manual

USER SAFETY INFORMATION

WARNING:
Caution:
Note:
NOTE: This manual may contain screen shots and pictures. Any screen shots and pictures are provided
for reference only and are not intended to convey actual operating techniques. Consult the actual screen in
the host language for specific wording.
WARNING(S)

This manual gives important information about the use and safety of this device. Deviating from operating
procedures, misuse or misapplication of the device, or ignoring specifications and recommendations could
result in increased risk of harm to users, patients and bystanders, or damage to the device.

Device captures and presents data reflecting a patient's physiological condition that when reviewed by a trained
physician or clinician can be useful in determining a diagnosis; however, the data should not be used as a sole
means for determining a patient's diagnosis.

Users are expected to be licensed clinical professionals knowledgeable about medical procedures and patient
care, and adequately trained in the use of this device. Before attempting to use this device for clinical
applications, the operator must read and understand the contents of the user manual and other accompanying
documents. Inadequate knowledge or training could result in increased risk of harm to users, patients and
bystanders, or damage to the device. Contact Welch Allyn service for additional training options.

To ensure that electrical safety is maintained during operation from AC (~) power, the device must be plugged
into a hospital-grade outlet.

Only use parts and accessories supplied with the device and/or are available through Welch Allyn, Inc.

Welch Allyn acquisition modules intended for use with the device include series resistance (9 Kohm minimum)
in each lead for defibrillation protection. Acquisition modules should be checked for cracks or breakage prior
to use.

The ELI 380 uses lithium-ion batteries. The following precautions should be taken regarding the batteries:
o
Do not immerse the device in water.
o
Do not heat or throw the device in fire.
o
Do not leave the device in conditions over 60 ºC or in a heated car.
o
Do not attempt to crush or drop the device.
o
Only use the approved Welch Allyn battery pack with the ELI 380.
o
Follow the disposal instructions in the ELI 380 Service Manual when the device is taken out of service.

The ELI 380 battery/batteries must be initially fully charged prior to use. Ideally, the battery/batteries must be
fully charged and fully discharged several times to allow for optimal performance.
Means there is the possibility of personal injury to you or others.
Means there is the possibility of damage to the device.
Provides information to further assist in the use of the device.
6