Techn. Warning; Parameter - Control Ports In Basic Mode; Table; Parameter - Control Ports In Alarm/Png Mode - Unify OpenStage M3 Administrator Documentation

Control Ports in Basic Mode:
Parameters
Activ. Availability
Availability NOK
Stop Availability

Table 3-11

Parameter – Control Ports in Basic Mode
Control Ports in Alarm/PNG Mode
Parameters
Start Monitoring
Monitoring NOK
Monitoring Off
Alarm Recall-loud
Alarm Recall-quiet
Alarm Recall
Table 3-12 Parameter – Control Ports in Alarm/PNG Mode
7. Confirm with Save.
3.2.1.4

Techn. Warning

In case of a technical warning, the handset signals the fault to the user, which the user can reset
with OK.
The maximum permitted time without a DPS request and the maximum permitted Out of range
time can be configured. If the time is exceeded, the warning is triggered. The value 0 disables
the respective check.
A DPS request is sent to the handset from the alarm server in order to check the availability of
the mobile user.
>
The DPS function is only supported for operation on a HiPath 4000.
Reception is necessary for voice and data communication between the handset and base
stations. If there is no reception, communication is not possible.
A31003-M2000-M103-2-76A9, 07/2014
Alarm and Emergency Call Configuration, Administrator Documentation
Sample Value
(up to 32 digits)
(up to 32 digits)
(up to 32 digits)
Sample Value
(up to 32 digits)
(up to 32 digits)
(up to 32 digits)
(up to 32 digits)
(up to 32 digits)
(up to 32 digits)
SHB_PNG-Konfig.fm
Configuration and activation
Configuration menu
Value
(blank)
(blank)
(blank)
Value
(blank)
(blank)
(blank)
(blank)
(blank)
(blank)
3-14