User Mode 6 (Detack Lamp Control Mode) "U6 - Xerox Wide Format 721P Operator's Manual

USER MODES

User Mode 6 (Detack Lamp Control Mode) "U6"

Menu Enter
Press [Menu] 6 times
Menu
Menu
Menu
58
If the print quality of prints made on Film media lack sharpness or
have a light overall appearance, a Detack Lamp in the print
process can be switched OFF using Mode 6. This action
increases the amount of Toner transferred to the print.
NOTE: If a higher than normal jam rate is experienced, the Detack
Lamp may have to be switched on again.
1.
Online
.
The [Menu] Key lights and the display indicates "U6" on the left
side of the display and the current setting on the right side.
Enter Online
2. Press [Enter]
3. Press the [ ® or ¬ ] key to change the value to 0 (OFF)
Enter Online
The value in the display will change to 0 (OFF)
The range is 1 – On and 0 - Off
NOTE: Factory default is "0", Off.
Online
Enter
4. Press the [Online] Key to exit the User Mode.
With the printer in the Standby (idle) condition, press the
[Menu] Key 6 times to enter Mode 6.
XEROX WIDE FORMAT 721P PRINTER OPERATOR MANUAL