Clearing Media Jam (J-01 & J-02) - Xerox Wide Format 721P Operator's Manual

PROBLEM SOLVING
Clearing Media Jam (J-01 & J-02)
Fuser
Handle
Cutter
handle
Inner Transport handle
Slit
Cutter
34
When a jam J-01 occurs, the media jams while feeding from Roll 1
in the top drawer.
MF
D1
D2
D3
When a jam J-02 occurs, the media jams while feeding from Roll 2
in the middle drawer.
MF
D1
D2
D3
1. Open the drawer indicated by the jam code.
2. Open the Right Side Door and turn the Inner Transport
Assembly handle to release the transport. Lower and lock the
transport by engaging the Down Lock.
3. If the media is not cut and the leading edge of the media has
reached the Drum or beyond the Drum, rotate the Cutter
handle to cut the media. Continue rotating the cutter handle
so that the green home position indicator appears in the cut
out.
4. If the leading edge of the media has reached the Fuser Unit,
Down Lock
open the Exit Cover and remove the jammed media by
rotating the Fuser Handle.
5. Release the Down Lock while holding the handle of Inner
Transport Assembly and lift it up gently until it stops. Then
twist the handle to the left to move the transport to the home
position. Finally, turn the handle to the right to lock the
transport.
6. Manually rewind the roll until the lead edge of the media is free
of the feed rollers.
7. Trim the lead edge of the roll square to remove any torn or
wrinkled media by using the "Slit" if necessary.
Exit
PF
Copy Density
D4
Exit
PF
Copy Density
D4
XEROX WIDE FORMAT 721P PRINTER OPERATOR MANUAL
Menu Enter
Menu Enter
Online
Online