Insufficient Gloss Or Fusing; Irregular Print, Mottled Image - Xerox 6100 User Manual

Image Defects

Insufficient Gloss or Fusing

Irregular Print, Mottled Image

6-30
If there is insufficient gloss of the printed image:
Check the fuser oil condition.
If there is insufficient fusing and the image comes off when the
printed image is rubbed:
Check your media type—envelopes, glossy stock, labels,
transfer media, and thick stock have to be set in the Thick
Stock mode.
The paper being used may have absorbed moisture (perhaps due
to high humidity or having water spilled on the paper supply).
Toner does not adhere well to paper where it has become wet.
Replace the paper in the cassette with dry paper.
Confirm the proper installation of the transfer roller. If
necessary, replace the transfer roller.
magicolor 6100 DeskLaser User's Guide