Loading The Media Cassette; Paper Specifications; Prepare The Paper - Xerox 6100 User Manual

Loading the Media
Cassette

Loading the Media Cassette

This section discusses loading the media cassette with paper. If you're using another
type of media, refer to "Using Media Other Than Paper" on page 3-7 for information.

Paper Specifications

Input
Type
Weight
Print Mode
Duplexing
Notes

Prepare the Paper

Take a stack of about 250 sheets ( ½ ream).
1
» Note: Don't unwrap the paper above the printer as this might cause paper
particles to fall into the printer.
2 Holding the stack with one hand, fan the
paper with the other.
This gets air through the sheets and prevents
static buildup.
3 Take off the top and bottom sheets.
Residual glue buildup on these sheets may cause media jams.
3-4
Cassette
Universal or optional Letter/A4
Capacity 250 sheets of 20 lb bond (75 g/m²) paper; capacity for other
weights varies accordingly
Any standard or recycled office paper suitable for plain-paper laser printers,
such as
– Hammermill Laser Print
Letterhead/memo paper
Plain paper, 16–24 lb bond (60–90 g/m²), thick stock 24–43 lb (90–163 g/m²)
Automatic (Plain Paper)
Duplexing is supported only on plain paper and limited thick stock. Supported
up to 28 lb (105 g/m²). See "Duplex (2-Sided) Printing" in chapter 4,
"Advanced Printer Operations."
We do not recommend using perforated or prepunched paper.
You should test any stock thicker than 24 lb (90 g/m²) to ensure that its
performance is acceptable.
magicolor 6100 DeskLaser User's Guide