Duplex Unit - Xerox 6100 User Manual

Duplex Unit

16 Adjust the anchor feet on the right side of
the LFU(s) to level the printer.
17 Plug the printer in and turn it on.
» Note: In compliance with UL guidelines, "The
appliance inlet is considered to be the main
disconnect device."
Duplex Unit
The duplex unit attaches to the rear of the printer and the lower feeder unit (LFU). You
must have at least one LFU attached before installing the duplex unit.
1 Turn off the printer and unplug it.
2 Unpack the duplex unit from its shipping box.
5-10
Right side of printer
105MATI.EPS
magicolor 6100 DeskLaser User's Guide