Xerox 6100 User Manual page 136

Status and Service
Messages
This status message...
ENERGY SAVER
FRONT DOOR OPEN
FUSER MISINSTALLED
FUSER OIL EMPTY
FUSER OIL LOW
6-16
means...
The printer is in energy saver
mode to reduce power
consumption during periods of
inactivity.
The front cover is open and
must be closed.
The fuser is not fully seated.
The oil bottle for the fuser is
empty. The printer will not print
any more copies until a new oil
bottle is installed.
The oil bottle for the fuser unit is
running low.
magicolor 6100 DeskLaser User's Guide
Do this...
No action needed. When
a print job is received,
the printer returns to
normal power within 90
seconds.
While in "sleep," the
printer's message
window will not display
operator status such as
door- and cassette-open
messages. The printer
remains in "sleep," until
a print job is received, or
until the printer is
manually switched from
offline to online.
Close the front cover.
Ensure the fuser is fully
seated.
Install a new fuser oil
bottle.
If you have a new fuser
oil bottle on hand, you
may want to install it
now. If you don't, order
one now. A limited
number of copies (about
100) will still print.
However, when the oil
runs out, the printer
stops and the FUSER
OIL EMPTY message
appears.