Status Messages - Xerox 6100 User Manual

Status Messages

» Note: Status messages are not displayed while the printer is off line.
This status message...
ADJUST INPUTBIN BIN
BELT CARTRIDGE
MISINSTALLED
CANCELLING JOB
CHECK CLEANING
ROLLER
CHECK WASTE TONER
CLEANING ROLLER
MISINSTALLED
DRUM JAM
DUPLEX JAM
DUPLEX UNIT PANEL OPEN
Printer Jams and Troubleshooting
means...
The specified cassette is not
inserted correctly.
The OPC belt cartridge is either
missing or incorrectly installed.
The Cancel key has been
pressed, and the print job is
being canceled.
The cleaning roller needs to be
replaced.
Either the waste toner pack is
full and needs to be replaced, or
it is incorrectly installed.
The fuser cleaning roller isn't
installed correctly.
Media has jammed in the drum
area.
Media has jammed in the duplex
unit.
One of the duplex unit doors is
open.
Status and Service
Messages
Do this...
Adjust the cassette.
Ensure that an OPC belt
cartridge is correctly
installed.
No action needed.
Install a new cleaning
roller.
Ensure that the waste
toner pack is not full and
is correctly installed.
Remove and reinstall
cleaning roller.
Locate and remove the
jam.
Locate and remove the
jam.
Ensure all doors are fully
closed.
6-15