ICP DAS USA I-7530 User Manual page 15

Note: The RS-232 communication parameters on the I-7530 module must
be set to the default value. The default values for the RS-232
communication parameters are given below:
7. Click the "Connect" icon to connect to the I-7530's testing mode. Then
the I-7530 Utility will show the test tab in the window as can be seen in
the below figure.
Figure 14: Connect to the operation mode of I-7530
8. Select the "Test" tab. Users will then be able to transmit or receive CAN
messages via the I-7530 module.
I-7530 RS-232 to CAN Converter User's Manual (Version 1.0,Aug/2004, I-7530) ------------ 15
Figure 13: COM port setting
Baud rate = 115200
Data bit = 8
Stop bit = 1
Parity = None
Checksum = No