Example - VeriFone Vx520 Implementation Manual

file = [filename
Download
downloaded]([download
location])
Validate file = [filename validated]
Install file = [filename installed]
Configuration [parameter name]
old = [Old paramete value]
new = [New parameter value]
Audit send ip:port = [destination ip:port]
RT Audit Start ip:port = [syslog server ip:port]
RT Audit Stop reason = [reason for stop]
app = [PaymentCore version]
Startup
os = [OS version]
eos = [EOS version]
emv = [EMV Kernel version]
script = [Secure Script version]

5.2.3. Example

Below is an example of three lines of log entries from a terminal.
PPL;Download;20141023173821;NOK;Man;file=9170060000001981(:);
© 2015 VeriFone. All rights reserved. VeriFone, the VeriFone logo, Vx, Mx, VeriCentre, VeriShield, Verix V, Verix and PAYware are either
trademarks or registered trademarks of VeriFone in the United States and/or other countries. All other trademarks or brand names are the
properties of their respective holders. All features and specifications are subject to change without notice.
The information contained in this document is confidential and property of VeriFone, Inc. This material may not be copied or published, or
divulged in part or in totality without written permission form VeriFone, Inc.
Author
Jevgenijs Smirnovs
E-mail
jevgenijs.smirnovs@verifone.com
Phone
+371 67844726
Document name Verifone Payment Core
Point VxPC F02.01.xxx
Implementation Guide
Date
12-Jun-2015
Page number Version
28 1.0
Result of file download from remote host.
Indicates file name downloaded and
ip+port of remote host from which file
was downlaoded
Validation result of file
Installation result of file
Terminal configuration change affecting
host IP configuration, terminal Identifiers,
rescheduling of operations, change of
terminal identifiers or user password
change.
Result of audit log sending. Indicates
destination server which the log was sent
to.
Start of Real-Time audit log sending to
SysLog server. Indicates IP&Port of
destination syslog server.
Interruption of Real-Type audit log
sending to syslog server. Optionally
indicates reason for stopping: e.g.
technical failure, customer interruption,
etc.
Indicates application startup. Indicates
application version as well as versions of
external modules used during handling of
sensitive data.