Trane ADAPTIVE CONTROL UCM-CLD Installation Operation & Maintenance page 15

Default = Disable
Default = UNLOCK
If the setting is changed to "LOCKOUT," the circuit
will become non-operational. The setting must be
manually changed to "UNLOCK" to regain
operation of the circuit.
Default = UNLOCK
Is there a compressor D ?
Yes
Compressor test, compressor D
"Press (+) (-) to change setting"
Circuit lockout, circuit 1
"Press (+) (-) to change setting"
Circuit lockout, circuit 2
"Press (+) (-) to change setting"
15
No
[Disable/Enable]
Next
[UNLOCK/LOCKOUT]
Next
[UNLOCK/LOCKOUT]
Next