Xerox 3225 User Manual page 93

DEVELOPER
ABSENT
DEVELOP WARNING It is nearly time to replace the developer unit
FUSER ABSENT
LCIT COVER OPEN
LOW TONER
MAINTENANCE DUE
NUMBER
OUTPUTBINFULL
OPC DRUM ABSENT
OPC WARNING
OUTPUTBIN
NUMBER JAM
PUT SIZE PAPER IN
NUMBER INPUTBIN
REPLACE CLEANER
REPLACE OPC DRUM The OPC drum must be replaced
TONER OUT
When the printer requires service, operation stops and the message
window displays CALL FOR SERVICE followed by the location of the
problem and error number. Have this information available when you
call for service.
Service calls should be placed to the vendor from whom you pur-
chased the printer. If the vendor cannot provide service, see appendix
A, "QMS Customer Support."
The developer unit is not installed.
The fuser is missing from the engine.
Close cover on the large-capacity or large-large-
capacity input tray.
It is nearly time to refill the toner
Specific maintenance is due. Refer to chapter 3,
"Periodic Maintenance" for information about specific
maintenance needed.
The specified output bin is full.
The OPC drum is missing from the engine.
It is nearly time to replace the OPC drum
Media has jammed between the printer engine and
the specified output tray.
The specified input bin or cassette needs media of
the specified size.
The cleaning unit must be replaced
The toner cartridge is empty.