CAS CASTON II Owner's Manual

CAS CASTON II Owner's Manual

Crane scale
Hide thumbs Also See for CASTON II:

Advertisement

CASTON
Crane Scale
OWNER'S MANUAL

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CASTON II and is the answer not in the manual?

Questions and answers

Summary of Contents for CAS CASTON II

  • Page 1 CASTON Crane Scale OWNER’S MANUAL...
  • Page 2 CONTENTS PRECAUTIONS PREFACE NAMES AND FUNCTIONS OPERATIONS 1. INSTALLATION 2. BATTERY COUPLING 3. OPERATION 4. HOLD FUNCTION PRODUCT SIZE ERROR MESSAGE SPECIFICATIONS...
  • Page 3 PRECAUTIONS To installate, safety pin in hook should be fixed to prevent dropping out from lift eye bolt. Do not subject the scale to sudden Escape from direct sunlight and Check the scale’s stability. temperature changes. vibrated place. Avoid from the shock of extreme Keep in a dry place and liquid free excessive weight.
  • Page 4 DISPLAY & KEYBOARD PREFACE Thank you for purchasing our CAS CASTON . These series have been designed with CAS reliability, under rigid quality control REMOTE CONTROL LOW BATTERY LOW BATTERY and with outstanding performance. Your specialty departments can enjoy these high quality reliable CAS products.
  • Page 5 KEY FUNCTION(LCD TYPE) OPERATIONS KEYS FUNCTIONS 1. INSTALLATION Used for ON or OFF the power. Tighten the Load Cell and ZERO Brings the display to “0” while drifted. the Hook and then insert pin into the hole in Hook. BODY Fix the pin with a safety This key is used to preset tare weight and subtract or clear the tare TARE...
  • Page 6 3. OPERATION PRODUCT SIZE Check self test of display by pressing ON switch. It will turn to initial display condition.(ON/OFF button wouldn’t work while the scale’s power is in OFF.) The ON/OFF key of remote control: Turn on and off of display only. (LED TYPE) BATTERY: Return to normal mode from battery save mode.
  • Page 7 ERROR MESSAGE SPECIFICATIONS The explanation of error message and solution CASTON MODEL LED TYPE LCD TYPE CH 01 MAX. TARE WEIGHT FULL TARE The reason for the error The data in the memory has been deleted by electric shock. LED(1.2 inch) LCD(1 inch) DISPLAY Solution...
  • Page 8 MEMO...

Table of Contents