Unpacking; Assembly - Detecto ICON Series Owner's Manual

Carefully remove the icon Digital Clinical Scale from the shipping carton and inspect it for any
damage that may have taken place during shipment. Keep and use the original carton and
packing material for return shipment if it should become necessary. The purchaser is
responsible for filing all claims for any damages or loss incurred during transit. Remove all
plastic wrapping, foam fillers and cardboard material from scale platform, display and other
components. You should have the following components:
Column with attached Display and Sonar Bracket
Column Cover
Scale Base
Scale Base Cover
Sonar Height Rod
AC Power Adapter
TOOLS REQUIRED:
3/16" Allen wrench
1. Place the scale base on a level floor.
2. Insert the column cover onto the column.
3. Position the column over the opening in the scale base and then plug the modular
connector from the column into the socket in the scale base.
Step 1
4. Insert the column into the scale base.
5. Using the 3/16" Allen wrench, evenly tighten the (4) Allen head screws on the back of
the scale base to secure column to scale base.
Step 4
3300-0192-0M Rev H icon Clinical Scale Owner's

UNPACKING

ASSEMBLY

Step 2
Step 5
Step 3
IMPORTANT! The nuts on the
front of the column opening in
the scale base may turn as you
are tightening the Allen head
screws. This is normal. DO
NOT use a wrench or other tool
to hold the nut to keep it from
turning.
3