Detecto ICON Series Owner's Manual page 33

Settings Page 8
SETTINGS
DHCP: On
IP: 192.168.0.133
NM: 255.255.255.0
GW: 192.168.0.1
<<<
DHCP:
Touching this key will open an entry screen to allow you to select the DHCP setting. This
setting selects whether the Wi-Fi wireless transmitter will use a dynamic IP address
assigned by a DHCP server or a static IP address. Consult with your network administrator
for the proper selection. Using the numeric keys, enter a new setting, and then press the
Save key.
Allowable settings for DHCP are: 0 = Static IP (Off), 1 = DHCP (On)
NOTE: If the setting for DHCP: = Off, the settings for NM: (Netmask) and GW:
(Gateway Address) will be shown on the touchscreen.
NM: (Netmask)
Touching this key will open an entry screen to allow you to enter the Wi-Fi network Netmask
for the network the scale will be connected to. Using the numeric keys, enter a new setting,
and then press the Save key.
The format for the Netmask is: ### . ### . ### . # (e.g., 255.255.255.0).
IMPORTANT! The Netmask of the scale should match the Netmask of the other computers
on your network.
GW: (Gateway Address)
Touching this key will open an entry screen to allow you to enter the Wi-Fi network Gateway
Address for the network the scale will be connected to. Using the numeric keys, enter a new
setting, and then press the Save key.
The format for the Gateway Address is: #, #, #, # (e.g., 192.168.0.1).
Press the <<< key to return to the Settings Page 7.
Press the Exit key to exit Setup and return to the Weight screen.
3300-0192-0M Rev H icon Clinical Scale Owner's
PAGE 8
Exit
The settings for NM:
and GW: will not be
shown if DHCP: = On.
27