Installation; Unpacking; Placement; Level Adjustment - Detecto WPB Series Owner's Manual

Unpacking

Before beginning the installation of your Model WPB Series Waterproof General Bench
Scale, make certain the scale has been received in good condition. Carefully remove the
scale from the shipping carton and inspect it for any evidence of damage (such as exterior
dents or scratches) that may have taken place during shipment. Keep the carton and packing
material for return shipment if it should become necessary. It is the responsibility of the
purchaser to file all claims for any damages or losses incurred during transit.

Placement

Place the scale on a stable, vibration-free table, stand, or cart. Make certain the AC power
cord is routed out of the way of normal traffic.
DO NOT place the scale on an unstable table, stand, or cart. The scale may
fall causing injury to the operator, and seriously damage the unit, or proper
operation of the scale may be inhibited.

Level Adjustment

Referring to the image below, observe the bubble level located to the left of the display to
make certain the scale is level.
If the scale is not level (the bubble will not be centered), adjust all four (4) feet as required to
center the bubble and attain a level scale. See the images below.
Not Level
8525-0380-0M Rev B WPB Series Owner's Manual

INSTALLATION

BUBBLE LEVEL
Level
Screw foot
in or out to
level scale.
3