Advertisement
Quick Links
Canterbury 4 DRW CHEST
Assembly Instructions
Dimensions
Width - 84.3cm
Depth - 41.9cm
71944
A01
Height - 99.7cm
Important
– Please read these instructions carefully before starting the assembly
If you need help or have damaged or missing parts, call the Customer Helpline:
Argos = 0345 6400800
- Please save for future reference
553/4801
565/2178
572/6080
25
kg
55
lbs
9
kg
20
lbs
max.
www.tvilum.com
71944 Version B Date 11/09/2017
Advertisement
Related Manuals for Argos Home Canterbury 553/4801
Summary of Contents for Argos Home Canterbury 553/4801
- Page 1 Canterbury 4 DRW CHEST Assembly Instructions 553/4801 - Please save for future reference 565/2178 572/6080 max. Dimensions Width - 84.3cm Depth - 41.9cm 71944 Height - 99.7cm www.tvilum.com Important – Please read these instructions carefully before starting the assembly If you need help or have damaged or missing parts, call the Customer Helpline: Argos = 0345 6400800 71944 Version B Date 11/09/2017...
- Page 2 Safety and Care Advice Important – Please read these instructions carefully before starting assembly • Check you have all the • During assembly, do not stand • We do not components and tools listed on or put weight on the product, recommend the use the following pages.
- Page 3 Components - Panels If you have damaged or missing components, call the Customer Helpline: Argos = 0345 6400800 Please check that you have all the panels listed below 00754 Left drawer side 00754 Left drawer side (34.5 x 14cm) x4 (34.5 x 14cm) x4 06080 Drawer bottom 06080 Drawer bottom...
- Page 4 Components - Fittings Please check that you have all the fittings as listed below Note: The quantities listed below are the correct amounts to complete the assembly. In some cases, more fittings may be supplied than required. 17414 20203 10401 Tape dots x1 Dowel (ø5 x 30mm) x31 Panel clips x8...
- Page 5 Assembly Instructions Step 1 Fittings you will need for this step: Insert cam bolts Cam bolt #31513 x8 Insert cam bolts 31513 into the holes on top and bottom panel LA . The cam bolts must be screwed flush down with the surfaces.
- Page 6 Assembly Instructions Step 3 Fittings you will need for this step: Flat head screw Flat head screw Drawer runner #26020 x16 #25233 x16 #41404 x8 Place drawer runners Extend drawer runner 41404 and make sure to note which way it runs. Place drawer runner 41404 so that they face the fronts of side panels...
- Page 7 Assembly Instructions 07-0 Step 4 Bille Dett Attach bottom panel sørg Place cam bolts from the efter bottom panel IA into the holes in the ends of side panels FN . Make sure that the finished edges are facing towards the front and that the unfinished sides are facing towards the bottom of the cabinet.
- Page 8 Assembly Instructions Step 5 Attach back panel Slide back panel 09665 smoothly down into the grooves in the side and bottom panel FN . 09665...
- Page 9 Assembly Instructions Step 6 Attach top panel Place the cam bolts from top panel LA into the end holes on side panels FN . When pushed together, tighten the cams as 09665 illustrated. 09665 9,8 cm 9,8 cm Step 7 Fittings you will need for this step: Assemble profiles Wedges...
- Page 10 Assembly Instructions Step 8 Fittings you will need for this step: Attach profile Flat head screw #26033 x7 Push the profile down Bill as it reaches the bottom panel IA . Use flat head screw 26033 to tighten. sør Bill efte sør 09665...
- Page 11 Assembly Instructions Step 10 Fittings you will need for this step: Attach assembled Glue #22601 x1 profile Bille Add glue 22601 in holes of the top panel LA . sør Bill efte Add one small drop of glue per hole. sør 09665 efte...
- Page 12 Assembly Instructions 07-09 Step 12 Attach base rail Billedr Dette sørge Flip the cabinet so that med i it stands on its bottom efterfø panel IA . Then pull of the paper from the tape dots and 09665 place the base rail 76316 behind the assembled profile.
- Page 13 Assembly Instructions Step 14 Fittings you will need for this step: Attach back panels Panel clips #10401 x8 Important: The unit MUST be sø square when the panel clips is attached. Lay the cabinet face down on the floor. To stabilize the back panel, use the panel clips 10401 .
- Page 14 Assembly Instructions Step 16 Fittings you will need for this step: Fix the unit to a wall Strap with the strap #94009 x2 Fix the unit to a wall with 94009 strap 94009 . The screw supplied together with the anti- topple bracket is to be used only for fixing the anti-topple bracket to...
- Page 15 Assembly Instructions Step 17 Fittings you will need for this step: Assemble drawers Dowel Cam bolt #20203 x16 #31687 x8 #31513 x8 Attach cam 31687 into the holes in left and right Bill drawer side 00754 + 00753 . sør Make sure that the cams’...
- Page 16 Assembly Instructions Step 18 Fittings you will need for this step: Assemble drawers Screw #20228 x16 Align holes at back of the drawer sides 00754 + Bill 00754 00753 with the holes on the drawer back 03333 . 00754 00753 sør Make sure the grooves 00753...
- Page 17 Assembly Instructions Step 20 Assemble drawer front Attach the drawer front sø EE by placing dowels and cam bolts in the cor- rect holes. See the detail drawing. Once pushed together, sø tighten the cams as illus- trated. 00754 06080 00754 00753 06080...
- Page 18 Assembly Instructions Step 22 Fittings you will need for this step: Attach drawer Drawer bottom support Screw bottom support #10510 x4 #25440 x12 Place the drawer bottom support 10510 on the bottom of the drawers. 00753 00753 See the detail drawing, for correct orientation.
- Page 19 Assembly Instructions # $PRPVIEW:{Pos_Beslag} Step 24 Fittings you will need for this step: Mount the drawers Machine screw #26214 x8 Place the drawers between 2 drawer runners each. See illustration for reference. Make sure that the drawer runners are pushed into the grooves of the drawer, touching the drawer front.
Need help?
Do you have a question about the Canterbury 553/4801 and is the answer not in the manual?
Questions and answers