Xerox WorkCentre PE16 User Manual page 127

Condition
Background
scatter
A
Misformed
characters
Page skew
Curl or wave
8.20
T
ROUBLESHOOTING
Suggested solutions
Background scatter results from bits of toner distributed on the
printed page.
• The paper may be too damp. Try printing with a different
batch of paper. Do not open packages of paper until
necessary so that the paper does not absorb too much
moisture.
• If background scatter occurs on an envelope, change the
printing layout to avoid printing over areas that have
overlapping seams on the reverse side. Printing on seams can
cause problems.
• If background scatter covers the entire surface area of a
printed page, adjust the print resolution through your
software application or the printer properties.
• If characters are improperly formed and producing hollow
images, the paper stock may be too slick. Try a different
paper. See "Paper Specifications" on page A.6.
• If characters are improperly formed and producing a wavy
effect, the scanner unit may need service. For service,
contact a service representative.
• Ensure that the paper is loaded properly.
• Check the paper type and quality. See "Paper Specifications"
on page A.6.
• Ensure that the paper or other material is loaded correctly
and the guides are not too tight or too loose against the
paper stack.
• Ensure that the paper is loaded properly.
• Check the paper type and quality. Both high temperature and
humidity can cause paper curl. See "Paper Specifications" on
page A.6.
• Turn over the stack of paper in the paper tray. Also try
rotating the paper 180° in the tray.