Xerox WorkCentre PE16 User Manual page 120

Display
Paper Jam 0
Paper Jam 1
Paper Jam 2
Power Failure
Retry Redial?
Stop Pressed
Toner Empty
Toner Low
Meaning
Paper has jammed in the
feeding area of the paper
tray.
Your machine detects non
feeding from the Bypass
tray.
Paper has jammed in the
paper exit area.
Your machine detects non
feeding from the Bypass
tray.
Paper has jammed in the
fuser area.
Power has turned off then
on and the machine's
memory has not been
saved.
The machine is waiting for
a specified time interval to
redial a previously busy
station.
The Stop/Clear button is
pressed during a copy or
fax operation.
The toner cartridge has
run out. The machine
stops.
The toner is almost empty.
Suggested solutions
Clear the jam. See page 8.4.
Load paper in the Bypass tray. Or
remove the jammed paper from the
Bypass tray.
Clear the jam. See page 8.7.
Load paper in the Bypass tray. Or
remove the jammed paper from the
Bypass tray.
Clear the jam. See page 8.5.
You need to start again the job
which you were trying to do before
the power failure.
You can press Enter to immediately
redial, or Stop/Clear to cancel the
redial operation.
Try again.
Replace with a new toner cartridge.
See page 7.8.
Take out the toner cartridge and
gently shake it. By doing this, you
can temporarily reestablish printing
operations.
T
ROUBLESHOOTING
8
8.13