What We Liked/Would Like To See - Xerox WorkCentre 4260/XF Brochure & Specs

Media Handling
WHAT WE LIKED
•
Paper capacity can be expanded to a substantial 3,100
sheets with the High Capacity Feeder.
•
The automatic two-sided printing saves paper.
•
This device is tailored to meet most business
requirements with configurations ranging from desktop
to floor standing models.
•
The finishing options provide users with collation and
50-sheet stapling capabilities and a 500 sheet output
tray.
•
Both standard tray 1 and trays 2 can each hold 500
sheets of 16 lb Bond to 28 lb bond (60 to 105 gsm)
media.
•
Both trays support media sizes ranging from 3.9" x 5.8"
inches (99 x 147 mm) to 11" x 14" inches. (216 x 356
mm). The High Capacity Feeder supports media sizes
ranging from 5.5" x 8.5" inches to 8.5" x 14" inches
(216 x 356 mm).
•
Fast tested document-feeder speed of up to 39 opm in
simplex mode and up to 11.9 opm in duplex mode.
WHAT WE WOULD LIKE TO SEE
•
BERTL was very satisfied with the WorkCentre 4260's
paper-handling capabilities.
Copyright © 2009 BERTL Inc.
All Rights Reserved. The license under which this document is made available and applicable law prohibit any reproduction or further transmission of any portion of this document. This
document may only be viewed electronically through the www.BERTL.com Web site and may not be stored in electronic or hard copy format. Any reproduction of trademarks is strictly
prohibited. BERTL accepts no responsibility for any inaccuracies or omissions contained in this document.
April 2009
Xerox WorkCentre 4260 XF
www.BERTL.com
April 2009
Page 39