Original Handling - Xerox WorkCentre 4260/XF Brochure & Specs

Media Handling
Both standard tray 1 and 2 can each hold 500 sheets of 16 lb
Bond to 28 lb Bond (60 to 105 gsm) media.
In order to adjust the paper drawers, the user must adjust the
green rear guide by squeezing the lever and sliding it the guide
into place to accommodate the desired paper size.
This paper tray is equipped with a side guide that the user must
slide in order to adjust the desired paper width.
Copyright © 2009 BERTL Inc.
All Rights Reserved. The license under which this document is made available and applicable law prohibit any reproduction or further transmission of any portion of this document. This
document may only be viewed electronically through the www.BERTL.com Web site and may not be stored in electronic or hard copy format. Any reproduction of trademarks is strictly
prohibited. BERTL accepts no responsibility for any inaccuracies or omissions contained in this document.
The High Capacity Feeder can hold up to 2000 sheets and
supports paper sizes ranging from 5.5 x 8.5 in. to 8.5 x 14 inches.

ORIGINAL HANDLING

While scanning speeds and duty volumes may be based
on perfect, standard letter/A4 size office-grade laser printer
media, a much wider range of media substrates is
commonly used and handled in the office world every day.
Scanning Speed
Obviously, the faster a scanner can scan originals, the
faster the user can retrieve those originals and return to
their desk, the sooner the device is available for someone
else to use. Slower scanning means diminished
productivity.
Document Feed Speed
# of MONOCHROME
originals MODE
10 Simplex Originals
5 Duplex Originals
10 Mixed-Size Originals
*Originals per minute.
April 2009
Xerox WorkCentre 4260 XF
www.BERTL.com
Time In
OPM*
Seconds
15.38 39.0
25.12 11.9
16.21 37.0
April 2009
Page 38