Installing Printer Software; System Requirements - Xerox WorkCentre PE220 User Manual

2 Getting Started

Installing Printer Software

System Requirements

2-12
NOTE:
You must install software using the supplied CD-ROM after you have
set up your machine and connected it to your computer. For details, see
Chapter 5, Printing.
The CD-ROM provides you with the following software:
Programs for Windows
To use your machine as a printer and scanner in Windows, you must install
the MFP driver. You can install some or all the following components:
• Printer driver- Use this driver to take full advantage of your printer's
features.
• Scan driver- TWAIN and Windows Image Acquisition (WIA) driver is
available for scanning documents on your machine.
• ControlCentre- Use this program to create phonebook entries and configure
the destination of the scan button. You can also update the firmware of the
machine.
Macintosh Driver
You can print and scan to and from Macintosh operating systems using your
machine.
Linux Driver
You can print and scan to and from Linux operating systems using your
machine.
Your machine supports following operating system.
Windows 98/Me/NT 4.0/2000/XP
The following table shows Windows requirements.
Item
CPU Windows 98/Me/NT
4.0/2000
Windows XP
RAM Windows 98/Me/NT
4.0/2000
Windows XP
Requirements
Pentium II 400 MHz or
higher
Pentium III 933 MHz or
higher
64 MB or higher
128 MB or higher
Recommended
Pentium III 933
MHz
Pentium IV 1
GHz
128 MB
256 MB
Xerox PE220