Starting your device
Device connection
Before plugging the power cord, it is
imperative to refer to the Safety/
Warranty/Regulatory booklet.
1 Connect the power cord to the device.
2 Make sure that the On/Off switch is on Off (O position). Plug the power cord to outlet on the wall.
The outlet should be located close to
the device and be easy to access.
3 Press the On/Off button to turn on the device (I position).
4
The following message appears:
HAVE YOU CHANGED
THE TONER? <OK>
OK
Press
.
5
When this message appears,
INSERT THE
TONER CARD
insert the smart card provided with the new toner cartridge as shown on the picture below.
6
A wait message appears.
PLEASE
WAIT
The smart card is read.
NEW TONER
REMOVE CARD
Remove the smart card from the reader, your machine is ready to print again.
7 The machine is set to English by default. To modify this parameter, refer to the paragraph Setup
the display language, page 21.
B2500 MFP User's Guide
17
B2500