Table of Contents
Advertisement
17
17. ADES™ connector - Use the 5-PIN ADES cable supplied to connect here
your PedalPro™ analogue multi-effect and control it with your Pedalino using
VR's "Advanced music DEScriptor" protocol.
For the proper functioning of the Pedalino Foot Controller, please ensure
that you use the supplied 5-PIN ADES™ cable. Please note, other types of
MIDI cables may NOT work.
18. EXPRESSION PEDAL connector - Connect here an optional expression
pedal (see page
13
for the list of approved pedals) and control in real time
the effects of your PedalPro.
19. Expression Pedal mode selector - Use to ensure the correct functioning
of the expression pedal to control the effects of your PedalPro. Please refer to
the section of this manual dealing with expression pedals for the correct set-
tings of pedals approved for use with your Pedalino Foot Controller.
Unstable parameter ranges or an unpredictable response of the expres-
sion pedal may indicate that the Expression Pedal mode selector is not cor-
rectly set for the expression or volume pedal you are using. See page <?>.
18
19
20
21
9VDC • 500mA
Getting to Know - Rear Panel
22
20. POWER switch - Turns the power on and off.
21. DC IN (AC adapter) jack - Connect here the AC adapter supplied.
You must only use the supplied AC adapter. Using any other adapter is
not recommended and may cause overheating or mulfunctions.
22. Cable loop - Pedalino's built-in cable strain relief. Loop the power cord,
ADES cable and the patch cable through this loop to prevent accidental
disconnections while playing (see section Setup Guide).
23. USB connector - Connect your computer (PC/Mac*) to the Pedalino us-
ing this connector when you need to upgrade the firmware of your Pedalino.
* Please check the
VR website
for system requirements and the latest PedalManager release.
7
23
6
Rev. 2.0 - EN EU - fw 4.22
Advertisement
Table of Contents
