• Display Time
• At Mode Selected
• Full Time
Default: [At Mode Selected]
• When you select an interposer tray, you cannot change the [Display Time] and [Apply Duplex]
settings.
• When [At Mode Selected] is selected for [Display Time], the [Desig. Sheet 1–11] settings only
appear when the designation sheet function is selected.
• You can specify the [Apply Duplex] settings only when [At Mode Selected] is selected for [Display
Time].
• The lock mark ( ) is displayed next to the paper tray when [Full Time] is selected for [Display
Time].
Tray Paper Settings
59