Ricoh Pro C7100S Operating Instructions Manual page 50

3. Changing Tray Paper Settings
11 × 14 , 10 × 15 , 10 × 14 , 13 × 19
3 1
12 / × 18
5
Default: [Auto Detect]
You can specify a custom size between 100.0 and 330.2 mm (3.94 and 13.00 inches) vertically,
and between 139.7 and 487.7 mm (5.50 and 19.20 inches) horizontally.
When loading paper that is 100.0 to 139.2 mm (3.94 to 5.49 inches) in vertical length, attach the
postcard side fences.
For details about auto detectable paper sizes, see "Recommended Paper Sizes and Types", Paper
Specifications and Adding Paper.
• If you want to use glossy paper, select [Coated: Glossy] for [Paper Type]. If you want to use matte
paper (including silk, dull, and satin paper), select [Coated: Matte] for [Paper Type].
• The lock mark ( ) is displayed next to the paper tray if [Apply Auto Paper Select] is not enabled.
Tray 4 (when the three-tray wide Large Capacity Tray is installed)
This section explains the paper tray settings for Tray 4 (when the three-tray wide LCT is installed)
Paper Type
• Plain Paper
• Recycled Paper
• Black
• Color
• Letterhead
• Preprinted Paper
• Transparency
• Tab Stock
• Translucent Paper
• Label Paper
• Coated: High Gloss
• Coated: Glossy
• Coated: Matte
• Envelope
• Textured Paper
• Prepunched Paper
• Magnet Paper
48
/ , 13 × 18 , SRA3 , SRA4
2
1 3
/ , 13 × 19 , 12 /
5 5
1 1
, 4 / × 5 / , Custom Size
5 2
1
× 19 / ,
5