Ricoh Pro C7100S Operating Instructions Manual page 52

3. Changing Tray Paper Settings
When loading paper that is 100.0 to 139.2 mm (3.94 to 5.49 inches) in vertical length, attach the
postcard side fences.
For details about auto detectable paper sizes, see "Recommended Paper Sizes and Types", Paper
Specifications and Adding Paper.
• If you want to use glossy paper, select [Coated: Glossy] for [Paper Type]. If you want to use matte
paper (including silk, dull, and satin paper), select [Coated: Matte] for [Paper Type].
• The lock mark ( ) is displayed next to the paper tray if [Apply Auto Paper Select] is not enabled.
Tray 3 to 8 (when the two-tray Wide Large Capacity Tray is installed)
This section explains the paper tray settings for Tray 3 to 8 (when the two-tray wide LCT is installed).
Paper Type
• Plain Paper
• Recycled Paper
• Black
• Color
• Letterhead
• Preprinted Paper
• Prepunched Paper
• Transparency
• Tab Stock
• Translucent Paper
• Label Paper
• Coated: High Gloss
• Coated: Glossy
• Coated: Matte
• Envelope
• Textured Paper
• Magnet Paper
• Metallic/Pearl Paper
• Clear File Folder
• Synthetic Paper
Default: [Plain Paper]
If you select [Tab Stock], you must configure the detailed settings.
50