4.
Press [Scan Value to Program with Media Identification Unit].
5.
Insert paper into the Media Identification Unit, and then remove it.
Hold the edges of the paper with both hands when inserting the paper.
Keep the paper flat as you pull it out.
6.
Change the settings.
If you change the [Paper Weight], [Paper Type], [Coated Paper Type], [Paper Color], [Prepunched
or Not], or [Textured or Not] and press [OK], a message appears to notify you that the [Advanced
Settings] will be initialized. To apply the changes for those settings, select [Change]. To cancel the
changes, select [Do not Change].
7.
Press [OK].
8.
Press [Overwrite].
Press [Save As] to register the paper settings as another custom paper.
9.
Press [Yes].
10.
Press [Exit].
11.
Press the [Paper Setting] key.
You can also close the [Tray Paper Settings] screen by pressing [Exit].
• For details about custom paper settings, see page 28 "Custom Paper Settings".
Registering a Custom Paper with the Media Identification Unit
DFZ009
23