Table of Contents
Advertisement
HygroPort I.S. User's Manual
8
PREPARATION FOR SHIPPING
For shipping purposes the instrument should be packed into its original carton, the latter
providing the recommended degree of protection during transit.
To prepare the instrument for shipping, proceed as follows:
1.
Turn the instrument off and remove any connections to the Gas In and Gas Out
ports and any external transmitters connected to it.
2.
If installed, remove the instrument from its carrying case.
3.
Pack the instrument in its original case (1) as shown in Figure 8.1.
NOTE:
Any accessories should be packed in the box (4).
returning them for repair, it is not necessary to return any external
transmitters or the battery charger.
4.
Create a packing list detailing all equipment contained in the box, place it inside
the box and seal the box.
Figure 8.1
Issue 6, December 2019
3
2
Instrument packing details
47
Unless
4
1
Kahn Instruments
Advertisement
Table of Contents
