Table of Contents
Advertisement
29. Reset the Emergency Stop Button. Pull and twist clockwise to return the button to
the normal position.
30. At the CiPress UI, select
31. From the Run view of the CiPress UI, select the appropriate paper width, gsm and
form length for your print job.
a) If the paper width on the CiPress UI is not the same as the loaded web, or a web
break or splice occurs, a fault message displays.
b) If the paper width on the CiPress UI is confirmed to match the loaded web, and
it is aligned correctly, the CiPress continues to cycle up for printing.
®
Xerox
CiPress 325 / 500 Production Inkjet System
Web Threading Guide
Setting Up and Activating the Web Registration Module
to clear any faults.
9-7
Advertisement
Table of Contents
