Xerox CiPress 325 Web Threading Manual page 52

Setting Up and Activating the Web Registration Module
a) Loosen the thumb screw.
Front Web Guide Thumb Screw
1
2 Front Web Guide
b) Move the Web Guide to the appropriate position.
A 5 mm gap should exist between the edge of the web and the Front and
1
Rear Web Guides.
c) Tighten the thumb screw.
27. Close all doors of the Primary CiPress .
28. Repeat steps 21 through 27 for the Secondary CiPress if this is a tandem
configuration.
9-6 ®
Xerox CiPress 325 / 500 Production Inkjet System
Web Threading Guide