Table of Contents
Advertisement
Setting Up and Activating the Web Registration Module
14. Tighten the brass Clamp on the Web Edge Knob.
Brass clamp.
1
15. Press
on the Web Registration Module Control Panel to select the Front Sensor.
16. Press
on the Web Registration Module Control Panel to activate the Web Guider.
17. After completing the Web Registration procedure, close all doors.
18. Reset all the faults displayed on the Touch Screen.
19. At the CiPress UI, select Fast Feed Line for about 20 seconds.
20. Press the Emergency Stop button on the Infeed Module of the print engine until it
clicks. The CiPress is now offline.
9-4
®
Xerox
CiPress 325 / 500 Production Inkjet System
Web Threading Guide
Advertisement
Table of Contents
