Avab Jaguar
Change Configuration for Pronto
Pronto configuration regarding number of channels and outputs is noted in file PRONTO.CFG in directory
C:>\PRONTO. The built in hardware dongle limits those numbers according to the ordered configuration.
To upgrade number of channels or outputs your Pronto is working with you have to contact your dealer or
transtechnik to order a new dongle code. As soon as the code is provided you have to insert it into the file
PRONTO.CFG.
The number of monitors is limited by the hardware dongle too. The second monitor however is activated by the
startup file P.BAT in C:>\PRONTO.
Figure 27:
File PRONTO.CFG
Never change or replace a DOS file if you are not sure on your action. Such an operation should be
executed by trained personal of your dealer or transtechnik only. If it is done by unqualified personal
you loose warranty.
Pronto_Peak603VL_eng
Version 1.2, Nov. 2003
Change Configuration
– 33 –