Change Configuration For Jaguar - ETC Avab Jaguar Service Manual

Avab Jaguar

Change Configuration for jaguar

To change configuration of jaguar (number of channels, attributes, outputs or unlocking of software options) you
need a new dongle code. Contact your dealer or transtechik. The new code has to be inserted into jaguar.
Figure 25: Display SKEYCODE
1 Execute a shucctdown
2 Monitor displays C:\VLC>.
3 Input SKEYCODE starts configuration software. Monitor displays actual configuration.
4
Check serial number delivered with dongle code is identical to displayed number. If no, once again
contact your dealer or transtechnik. In any case end the operation.
5 Move cursor to window New code by using TAB key of external keyboard.
6 Type in delivered code.
7 Save code by typing key F7 (Write) on external keyboard.
8
If error message, repeat input.
9
The display below input window now shows new configuration.
10 End configuration by typing Alt-X
11 Restart console
Pronto_Peak603VL_eng
Version 1.2, Nov. 2003
Procedure
Note upper/lower case characters and blanks!
Change Configuration
– 30 –