Avab Jaguar
Hard Disk
Figure 14: hard disk
1
Unplug flat cable (notice red marking) and power lines
2
Unfasten 4 screws attaching the hard disk unit to the assembly and take it out.
1
Attach hard disk unit by 4 screws to assembly
2
Plug in flat cable (notice red marking on cable) and power lines.
3
If the hard disk is completely new, DOS and jaguar software have to be installed. See page 30
Pronto_Peak603VL_eng
Version 1.2, Nov. 2003
Remove
Install
Bottom Part
– 17 –