Avab jaguar/Pronto!
Front Panel Controller TT-1781
Figure 21:
Bottom view front panel, location of
front panel controller PCB
Before you start, label all cables
1
Unplug flat wire cables (note red marking) and all the other cables
2
Unfasten 7 screws and take out controller PCB
1
Insert controller TT-1781, fasten it by 7 screws
2
Plug in flat cables (note red markings) and all other cables, take care on labels
Take care on proper fitting
Pronto_Peak603VL_eng
Version 1.2, Nov. 2003
Remove
Install
Front panel
EPROM front
panel control
software
– 24 –