Table of Contents
Advertisement
Avab Jaguar
Floppy Disk Drive
Figure 15:
View assembly floppy drive
1
Unplug flat cable (note red marking) and power cable from drive
2
Remove assembly by unfastening 2 screws on rear plane
3
Unfasten 4 screws attaching the hard disk unit to the assembly and take it out.
1
Attach floppy disk unit by 4 screws to assembly
2
Attach assembly to rear plane by 2 screws
3
Plug in flat cable (notice red marking on cable) and power lines.
Danger for damage
Care for proper connection, connectors may be shifted
4
Connect flat cable, note red marking.
Pronto_Peak603VL_eng
Version 1.2, Nov. 2003
Remove
Install
Bottom Part
– 18 –
- Quick Links:
- Table of Contents
Hide quick links:
Advertisement
Table of Contents
