Accessories - Dantherm 3500 Installation Manual

EN
Wall bracket and two bars for outdoor unit. Including screws.
Dimension(HxLxW): 254 x 466 x 52mm
Light model rubber feet for outdoor unit made of durable recycled rubber. Reduces
vibration from the unit and provides stability.
Aluminium channel securely anchored in top for easy fixation of the unit.
Quick and simple installation.
Boxed kit with fixings. Including two bars and screws.
Dimensions (HxLxW): 95x450x160 mm
Weight: 4,8kg
Heavy model rubber feet for outdoor unit made of durable recycled rubber which
reduces vibration and provides stability.
Aluminium channel securely anchored in top for easy fixation of the unit.
Quick and simple installation.
Boxed kit with fixings. Including two bars and screws.
Dimensions (HxLxW): 95x1000x160 mm
Weight: 10,3 kg
Shock and vibration absorber includes a set of four absorbers for outdoor units.
The absorbers can be mounted on wall bracket and ground mat.
Adapter bars for mounting the outdoor unit on existing wall brackets. Including two
bars and fixation. Length: 1000mm
Condenser pump for drainage for indoor unit.
Voltage: 230V/50Hz Max 0,11 Amps
Max 6 litres per hour at lift height 7m
For indoor use only.
Kit includes:
• Pump, level sensor mounted at wall bracket
• 5m Ø4/Ø8 tubes for drainage outlet
• Adapter for connecting to 1/2" drainage hose
• Anti siphoning device.
3m copper tubes 3/8" & 1/2" with 10mm insulation and UV protection. Tubes are
prepared for easy connection with flares and flare nuts.
5m copper tubes 3/8" & 1/2" with 10mm insulation and UV protection. Tubes are
prepared for easy connection with flares and flare nuts.
10m copper tubes 3/8" & 5/8" with 10mm insulation and UV protection. Tubes are
prepared for easy connection with flares and flare nuts.
Dantherm RS485 display unit
SD card 2GB for logging data.
6

Accessories

Description
52
0
42,5
235
Art. No.
543
092957
Linear dimensions without tolerances according to
DS/EN 22768-1 medium. Angular dimensions without tolerances: ± 1°
097025
This Drawing is furnished with the understanding that the
essence there of will not be reproduced in whole or in part
without written authorization by Dantherm Air Handling A/S.
All designs originated by Dantherm Air Handling A/S are the
property of said Company and will be protected by Patents.
097026
074666
097027
097028
097079
097029
097030
075210
087432
466
52
446
Sheetmetal flatstate is based on Dantherm Air Handling A/S Surface appearance according to reference
process equipment and is only intended as a guide. table LZT 142 0001, category
MATERIAL:
THICKNESS: WEIGHT: g
Mounting bracket (set of 2) for Split AC
Ophængsarm (sæt af 2) for Split AC
SCALE: NOT TO SCALE
543
8
REV. BY: kny
DATE: 14-11-2017
REF.: kny
DATE: 04-10-16
PART NO REV.:
092956 A