Operation - Dantherm 3500 Installation Manual

EN
Components
18

Operation

The adaptive cooling strategy guarantees the lowest power consumption at all time during
operation.
Reduces wear and tear of cooling system, and lowers acoustical noise level.
• SD card* socket for data logging and configuration.
• RS 485 RTU ModBus*. (Monitoring and remote user panel)
• Real time clock and calendar.
• 7 segment display* for temperature readout and setpoint adjust.
• Digital input and Alarm output*
The CC0 controller has two onboard LEDs.
Green LED indicates operation, red LED will indicate fail or lock mode
During SD card read/write process, green LED will flicker.
A onboard 4 digit, 7 segment display, is available for temperature information and adjustment of
cooling and heating setpoint.
The CC0 has a RTU ModBus communication protocol.
Hardware layer, RS 485, RJ 45 connector.
Baud rate: 9600,n,8,1