Routine Maintenance; Freedom Hw Unit; Batteries; Table 4-3 Battery Charging Voltage And Current Settings - Xantrex ENERGY HW 1000 Owner's Manual

Table 4-3 Battery Charging Voltage and Current Settings

Battery Type Bulk/Absorption
Voltage (Volts)
Flooded 14.4
GEL 14.2
AGM 14.3
Fixed 13.5

Routine Maintenance

Freedom HW Unit

Batteries

4–14
Table 4-3 below illustrates the battery charging voltage and current
settings.
Float Voltage
(Volts)
13.5
13.8
13.4
13.5
Minimal maintenance is required to keep your
properly. Periodically you should:
• Clean the exterior of the unit with a damp cloth to prevent the
accumulation of dust and dirt.
• Ensure that the DC cables are secure and fasteners are tight.
• Make sure the ventilation openings are not clogged.
When possible, you should recharge your batteries whenever a low
voltage warning or a shutdown occurs with the
the batteries a much longer life than recharging when the batteries have
been almost completely discharged.
Charge Current
(Amps)
5, 15
35, 55
5, 15
35, 55
5, 15
35, 55
5, 15, 35, 55
Freedom HW
Freedom
Float Current
(Amps)
1.5
4.5
1.5
4.5
1.5
4.5
not applicable
operating
HW. This gives
975-0467-01-01