Connecting Appliances To The Xpower Plus; Routine Maintenance; Recharging Your Batteries; Battery Tips - Xantrex XPower 1000 Plus Owner's Manual

Operation
Connecting Appliances to the

Routine Maintenance

Recharging Your Batteries

4–6
Since regular amounts of AC current flows between the
your appliances, commonly available extension cords can be used to
connect the XPower Plus
connected at a considerable distance from the
more practical and less expensive to lengthen the AC wiring than it is to
lengthen the DC wiring.
Minimal maintenance is required to keep your
properly. Periodically you should:
• Clean the exterior of the unit with a damp cloth to prevent the
accumulation of dust and dirt.
• Ensure that the DC cables are secure and fasteners are tight.
• Make sure ventilation openings on the DC panel and bottom of the
inverter are not clogged.
When possible, recharge your batteries when they are about 50 percent
discharged or earlier. This gives the batteries a much longer life cycle than
recharging when they are almost completely discharged. For more
information on maintaining batteries, see
For information about Xantrex battery chargers, see our web site at
www.xantrex.com
XPower Plus
to your appliances. If your appliance will be
"Battery Tips" on page
XPower Plus
XPower Plus, it is much
XPower Plus operating
445-0145-01-01
and
B–8.