ABC Design Giro Instructions For Use Manual page 8

1. Opening the pushchair
a.
Release the transportation lock.
b.
Unfold the pushchair.
c.
Use your foot to press the mechanism down which locks the pushchair into its open position.
CAUTION: Ensure that all the catches are engaged before use.
2. Mounting the front wheels
a.
Push the front wheels into the fittings until they click into place.
b.
To remove the front wheels again, press the catches on the wheel fittings.
3. Fitting the sun canopy
First fasten the clips on the cover on both sides of the frame. Then attach the rubber bands to the frame.
4. Using the brakes
Press the lever down to apply the brakes.
Press the lever up to release the brakes.
5. Fastening the harness
To fasten the harness push the two plastic catches (1) together until they engage.
Adjust the strap to a setting where the baby is held in the correct position.
6. Unfastening the harness
To unfasten the harness, press the button (1) slightly offset to the left and right.
Caution: Always use the shoulder harness and lap belt together.
7. Adjusting the backrest
To adjust the backrest, press the catch on the adjustment mechanism (1) on both sides. Then adjust the
position as required by pushing the mechanism forwards or backwards (2).
8. Adjusting the leg rest
Press the lever under the leg rest on both sides and move the leg rest to the required position.
EN - 05