Hitachi HIDIC EH-150 Applications Manual page 15

Configuration from configurator
3.2.3
The configuration of the EH-RMP is accomplished by the configurator colled SyConDP.
For general information about the configurator, please refer to the manual for this configurator.
(1) The entry of the EH-RMP
Click the Master icon , and click left-top corner on "Device" area.
Select the "Profibus-DP Master", and set the station address.
Fig. 3.2 Select Master device
(2) The entry of the slave device
Click the I/O Slave or Module Slave icon, and click left side on "Device" area.
Select a slave device, and set the station address.
Following figure is the example of selected the EH-IOCP of Modular Slave.
Fig. 3.3 Select Slave device
Chapter 3 CONFIGURATIONS
3-4