Advertisement
UNINET IMAGING INC. • OKIDATA® B6300 REMANUFACTURING INSTRUCTIONS
37. The end-cap should then slide out.
These gears are designed to fit one way, so reinstalling won't become too difficult.
40. When the lever has been flipped up, lift
that side of the roller first.
www.
uninet
imaging.com
11124 Washington Blvd., Culver City, California U.S.A. 90232 Ph: 310 280-9620 • Fx: 310 838-7294 • techsupport@uninetimaging.com
© 2005 Uninet Imaging Inc. All Trademark names are property of their respective owners. Product brand names mentioned are intended to show compatibility only. Uninet Imaging does not guarantee or warrant downloaded information.
38. Remove all gears from the cartridge as shown in the following photos.
41. Continue with the other side until the
MAG is completely removed.
USA
EUROPE
Ph:
+310-280-9620
+34-93-757-1335
Fx:
+310-838-7294
+34-93-741-4166
39. Unlock the MAG roller by lifting the
lever up as shown.
42. Now you are ready to remove the
Doctor Blade.
JAPAN
BRAZIL
+81-3-44-55-2789
+55-11-4822-3033
+310-838-7294
+55-11-4822-3353
ARGENTINA
+54-11-4574-3706
+54-11-4574-3706
Advertisement
