Advertisement
UNINET IMAGING INC. • OKIDATA® B6300 REMANUFACTURING INSTRUCTIONS
13. Use a hook tool to release the spring
from the gear-less side.
16. You are now ready to disassemble the
drum unit.
19. Remove the drum gear holder by
pulling it out.
www.
uninet
imaging.com
11124 Washington Blvd., Culver City, California U.S.A. 90232 Ph: 310 280-9620 • Fx: 310 838-7294 • techsupport@uninetimaging.com
© 2005 Uninet Imaging Inc. All Trademark names are property of their respective owners. Product brand names mentioned are intended to show compatibility only. Uninet Imaging does not guarantee or warrant downloaded information.
14. Lift evenly to separate the drum unit
from the cartridge.
17. Remove the top screw of the drum gear
holder.
20. Remove the two drum pin screws on
the other side.
USA
EUROPE
Ph:
+310-280-9620
+34-93-757-1335
Fx:
+310-838-7294
+34-93-741-4166
15. Drum unit removed.
18. Remove the bottom screw of the drum
gear holder.
21. Remove the drum pin by pulling it out.
JAPAN
BRAZIL
+81-3-44-55-2789
+55-11-4822-3033
+310-838-7294
+55-11-4822-3353
ARGENTINA
+54-11-4574-3706
+54-11-4574-3706
Advertisement
