1. Manuals
  2. Brands
  3. Worksaver Manuals
  4. Lawn and Garden Equipment
  5. SSPF-3742
  6. Owner's/operator's manual

Worksaver SSPF-3742 Owner's/Operator's Manual

Skid steer pallet fork also for some tractor front loaders
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
OWNER'S /
OPERATOR'S
MANUAL
MODEL NO.'s
SSPF-3742
SSPF-3748
CAUTION
For Safe Operation
Read Rules And
Instructions Carefully
SINO LEEINGLES, PIDA AYUDA
A AIGUIEN QUE SI LO LEA
PARA QUE LE TRADUZCA LAS
MEDIDAS DE SEGURIDAD.
THE FOLLOWING SAFETY PRECAUTIONS SHOULD BE THOROUGHLY UNDERSTOOD
1. Select an area for assembly that is clean and free of any
debris which might cause persons working on the
assembly to trip.
2. Do not lift heavy parts or assemblies. Use crane, jack,
tackle, fork trucks or other mechanical devices.
3. Preview the assembly instructions in your operator's
manual before proceeding further.
4. If the assembly instructions call for parts or assemblies to
be blocked up, use only blocking material that is in good
condition and is capable of handling the weight of the
assembly to be blocked. Also insure that the blocking
material is on a clean, dry surface.
5. Never put hands, or any part of body, under blocked up
assemblies if at all possible.
SKID STEER PALLET FORK
SOME TRACTOR FRONT LOADERS
Safety Instructions
Tractor Preparation

Operating Instructions

C A U T I O N
BEFORE ATTEMPTING TO BEGIN ASSEMBLING THIS MACHINE
ALSO FOR
Assembly & Mounting
Maintenance
Repair Parts
6. After completing assembly, thoroughly inspect the
machine to be sure that all nuts, bolts, hydraulic fittings
or any other fastened assemblies have been thoroughly
tightened.
7. Before operating the machine, thoroughly read the
operation section of your operator's manual.
8. Before operating, read the maintenance section of your
operator's manual to be sure that any parts requiring
lubrication, such as gearboxes, are full, to avoid any
possible damage.
9. Before operating equipment – If you have any
questions regarding the proper assembly or
operation, contact your dealer or representative.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SSPF-3742 and is the answer not in the manual?

Questions and answers

Related Manuals for Worksaver SSPF-3742

Summary of Contents for Worksaver SSPF-3742

  • Page 1: Operating Instructions

    OWNER’S / OPERATOR’S MANUAL MODEL NO.’s SSPF-3742 SSPF-3748 CAUTION For Safe Operation Read Rules And Instructions Carefully SINO LEEINGLES, PIDA AYUDA A AIGUIEN QUE SI LO LEA PARA QUE LE TRADUZCA LAS MEDIDAS DE SEGURIDAD. THE FOLLOWING SAFETY PRECAUTIONS SHOULD BE THOROUGHLY UNDERSTOOD BEFORE ATTEMPTING TO BEGIN ASSEMBLING THIS MACHINE 1.

  • Page 2: Table Of Contents

    Like all mechanical products, it will require cleaning and upkeep. Use only genuine Worksaver, Inc. service parts. Substitute parts will void the warranty and may not meet stan- dards required for safe and satisfactory operation. Record the model and serial number of your Loader Fork here: Model:________________________________________ Serial Number:_______________________________ RETAIL CUSTOMER’S RESPONSIBILITY...

  • Page 3: Limited Warranty

    2. If the unit has been subjected to misapplication, abuse, misuse, negligence, fire or other accident. 3. If parts not made or supplied by Worksaver have been used in connection with the unit, if, in sole judge- ment of Worksaver such use affects its performance, stability, or reliability.
  • Page 4 To the Owner/Operator/Dealer All implements with moving parts are potentially hazardous. There is no substitute for a cautious, safe-minded opera- tor who recognizes the potential hazards and follows reasonable safety practices. The manufacturer has designed this implement to be used with all its safety equipment properly attached to minimize the chance of accidents. Read the safety messages on the implement and shown in your manual.

  • Page 5: Safety Instructions

    SAFETY INSTRUCTIONS ( continued) EQUIPMENT SAFETY GUIDELINES Safety of the operator is one of the main concerns in designing and developing a new piece of equipment. Designers and manufacturers build in as many safety features as possible. However, every year many accidents occur which could have been avoided by a few seconds of thought and a more careful approach to handling equipment.

  • Page 6: Safety Training

    SAFETY INSTRUCTIONS SAFETY TRAINING Safety is a primary concern in the design and manufacture of our products. Unfortunately, our efforts to provide safe equipment can be wiped out by a single careless act of an operator. In addition to the design and configuration of equipment, hazard control and accident prevention are dependent upon the awareness, concern, prudence and proper training of personnel involved in the operation, transport, maintenance and storage of equipment.

  • Page 7: Starting And Stopping Safety

    SAFETY INSTRUCTIONS SAFETY SIGNS Keep safety signs clean and legible at all times. Replace safety signs that are missing or have become illegible. Replaced parts that displayed a safety sign should also display the current sign. Safety signs are available from your Distributor or Dealer Parts Department or the factory. How to Install Safety Signs: Be sure that the installation area is clean and dry.

  • Page 8: Operational Safety

    SAFETY INSTRUCTIONS ( continued) OPERATIONAL SAFETY The use of this equipment is subject to certain hazards which cannot be protected against by mechanical means or product design. All operators of this equipment must read and understand this entire manual, paying particular attention to safety and operating instructions, prior to using.
  • Page 9 SAFETY INSTRUCTIONS ( continued) OPERATIONAL SAFETY (continued) Before you operate any equipment, check over all pins, bolts and connections to be sure all are securely in place. Replace any damaged or worn parts immediately. Do not work under a raised loader unless it is securely blocked or held in position. Do not depend on the power unit hydraulic system to hold the implement in place.
  • Page 10 SAFETY INSTRUCTIONS ( continued) OPERATIONAL SAFETY (continued) When maneuvering close to buildings or passing through narrow areas, be sure to allow sufficient clearance for the power unit, loader, and load. Drive slowly. Operate loader from operator’s seat only. Remain at controls until operating cycle is complete. Use extreme care when working on inclines and hillsides.

  • Page 11: Transport Safety

    SAFETY INSTRUCTIONS ( continued) TRANSPORT SAFETY Comply with state and local laws governing highway safety and movement of farm machinery on public roads. The use of flashing amber lights is acceptable in most localities. However, some localities prohibit their use. Local laws should be checked for all highway lighting and marking requirements.

  • Page 12: Maintenance Safety

    SAFETY INSTRUCTIONS ( continued) MAINTENANCE SAFETY Good maintenance is your responsibility. Poor maintenance is an invitation to trouble. Follow good shop practices. - Keep service area clean and dry. - Be sure electrical outlets and tools are properly grounded. - Use adequate light for the job at hand. Make sure there is plenty of ventilation.

  • Page 13: Storage Safety

    SAFETY INSTRUCTIONS MAINTENANCE SAFETY (continued) After servicing, be sure all tools, parts and service equipment are removed. Check to ensure all safety signs are installed and in good condition. (See safety sign section for location drawing.) Do not allow grease or oil to build up on any deck or platform. Never replace hex bolts with less than grade five bolts unless otherwise specified, i.e.

  • Page 14: Safety Decals

    S A F E T Y I N F O R M AT I O N When working on side hills, DO NOT RAISE LOADER TOO HIGH. Keep an eye on terrain changes. Keep load low. SAFETY SIGNS SAFETY DECALS Safety is a primary concern in the design and manufacture of our products.
  • Page 15 The models SSPF-3742 and SSPF-3748 pallet forks can handle loads up to 4,000 lbs. Load ratings are figured with the load about 20” in front of the fork lift frame and evenly distributed between the two fork tines.

  • Page 16: Instructions

    Never exceed the lift capacity of the tractor/loader or skid steer used with the forklift. W A R N I N G ! The SSPF-3742 and SSPF-3748 Loader Forks are NOT to be used for large round bales, as this would create a hazardous condition.
  • Page 17 INSTRUCTIONS M A I N T E N A N C E W A R N I N G ! Always stop the tractor or skid steer, set brake, shut off engine, remove key, and lower loader to ground before attempting to service. Never leave equipment unattended with engine running.

  • Page 18: Parts Drawing

    SSPF-3742 & SSPF-3748 PA RT S D R AW I N G...

  • Page 19: Parts List

    SSPF-3742 & SSPF-3748 PA RTS LIST...

  • Page 20: Safety Precautions

    MAKE EVERY DAY A HOLIDAY FROM ACCIDENTS! W O R K S AVER, INC. P.O. BOX 100 LITCHFIELD, IL 62056-0100 WEB: http:// www.worksaver.com (217) 324-5973 E-MAIL: sales@worksaver.com...

This manual is also suitable for:

Sspf-3748

Table of Contents